Business
WorkCover for Labour Hire: Who Pays and the Rules by State
The labour hire business insures its temps and pays the WorkCover premium, rated on each host's industry. Who covers what in every state, and what hosts owe.
A labour hire business pays WorkCover for its temps, not the client. In every state and territory the business that employs and pays an on hired worker must hold workers compensation insurance for him. In Victoria, Queensland, South Australia and Western Australia the premium for those workers is rated on the industry of the host's workplace rather than on your own recruitment office. The host pays nothing for your workers' cover, yet it still owes them a safe site, and in Victoria and South Australia it has to help with their return to work after an injury. Each state runs its own scheme, so a desk with workers in two states can end up holding two policies.
For a temp desk recruiter who has only ever seen WorkCover from the inside of an agency, this is one of the insurances that makes the wall look real, sitting right next to the payroll float and the licence. What follows is what each state's scheme publishes. Your accountant, broker or lawyer applies it to your business. For where WorkCover sits among the other start up costs, see the guide on how to start a temp agency in Australia.
Who is the employer when a worker is on hire
Workers compensation insurance is the compulsory cover that pays an injured worker's wages, medical costs and return to work support. Each state calls its scheme something different: WorkCover in Victoria and Queensland, workers insurance through icare in New South Wales, work injury insurance through ReturnToWorkSA in South Australia.
The labour hire business is the one that employs the worker and pays him. That makes it the employer for workers compensation. It needs a policy before the first worker starts, and the premium is its cost. The host is the client whose site the worker turns up to. It directs the work day to day, but it is not his employer for the insurance.
Canberra's regulator puts it plainly in its own guidance on labour hire: the labour hire company insures the workers under its contract. It also warns that cover bought by a payroll company may not reach those workers.
How the premium is set for on hired workers
An industry classification is the code a scheme uses to set your premium rate, and it reflects how risky the work is. A recruitment office on its own sits in a low risk class. Workers on hire to a scaffolder or a meat processor do not. So four of the schemes rate on hired wages against the host's industry, workplace by workplace.
In practice you declare wages per client, or per client industry, and each slice is priced at that industry's rate. Consider a desk with three clients in three industries, such as a warehouse, a food factory and a civil contractor. Say that desk pays $1 million in wages, with $500,000 going to workers at the warehouse, $300,000 at the factory and $200,000 on the civil site. It declares three industries and pays three rates, and the civil slice can cost more than its share of the wages suggests. Your own office staff go in a separate class for labour supply services.
What decides the code is the client's predominant business activity, not the job title on the worker's timesheet. For example, a labourer placed at a manufacturing plant is rated as manufacturing, even if your own business is registered as recruitment. Ask each new client for its classification code before the first shift, fact check it against the scheme's own search where one exists, and keep it with the client file.
WorkCover for labour hire by state, at a glance
- Victoria: register with WorkSafe through one of its agents once you pay or expect to pay more than $7,500 a year in remuneration, or from the first apprentice. Each client workplace is added to your policy and given the same industry classification as the client's workplace. WorkSafe runs a search facility so you can confirm a client's code.
- New South Wales: take out a policy with icare once wages pass $7,500 a year, or from the first apprentice or trainee. icare's yearly classification document carries its own rule for workers hired out, so confirm the class for each placement with icare.
- Queensland: every employer of workers needs an accident insurance policy with WorkCover Queensland before they start. Labour hire wages go against 20 classifications built for labour hire, one for your own office and 19 matched to client industries.
- South Australia: register with ReturnToWorkSA within 14 days of employing your first worker. Each host is added to your registration under the industry code of each host, and a worker's wages move with him when he moves to a host in a different industry.
- Western Australia: buy a policy from a licensed private insurer. WorkCover WA tells labour hire employers to split wages by the rating class that matches the host's main business activity, and a false declaration is an offence.
- Tasmania: buy a policy from an insurer licensed by the WorkCover Tasmania Board, covering every worker, whether full time, part time, casual or apprentice.
- Australian Capital Territory: buy a policy from an insurer approved by WorkSafe ACT. An employer caught without one faces a civil penalty of up to double the premium it avoided.
- Northern Territory: buy a policy from an insurer approved by NT WorkSafe. If you employ people to work in the Territory, cover from another state does not count and you need a Territory policy as well.
Workers in more than one state
Each scheme is its own insurance, and a policy in one state is not cover in the next. A desk with crews in Brisbane and on the Gold Coast holds one Queensland policy. Put a crew on a site in Tweed Heads and you need to ask icare whether those wages call for a New South Wales policy as well. Labour hire licences work the same way, and the page on who needs a labour hire licence sets out the test in each state.
Setting up WorkCover for a new labour hire desk
The order matters, because the policy has to exist before the first shift and the declaration has to match the clients you actually supply. A workable sequence looks like this:
- List the states where you will pay wages. Each one is a separate scheme with its own insurer, and South Australia gives you 14 days from your first worker to register.
- Get each client's industry code before you quote. In Victoria a WorkSafe agent can search it, in Queensland it sits on the client's own WorkCover policy, and in South Australia ReturnToWorkSA runs an online code search.
- Take out the policy with the right insurer: a WorkSafe agent in Victoria, icare in New South Wales, WorkCover Queensland, ReturnToWorkSA, or a licensed or approved private insurer in the other four.
- Declare estimated wages per client industry, with your own office staff in the labour supply class.
- Move wages when a worker moves to a client in a different industry, and declare actual wages at each renewal.
Price the premium into each client's charge rate from the first quote, the same way you price super and payroll tax. The page on payroll tax for labour hire covers the other wage based cost that grows with every worker you put out.
What the host still owes your workers
Your client does not pay the premium. It still carries real duties. Under the model work health and safety laws both of you run a business with duties to the worker, and you must consult, cooperate and coordinate with each other. A person conducting a business or undertaking is the legal term for each of you. The host owes your worker the same safety duties it owes its own staff. You have to check that the site is safe before and during the placement, including first aid and emergency plans. Neither of you can hand those duties to the other by contract.
After an injury the duties keep going. In Victoria the host must cooperate with the labour hire business on the worker's return to work, which can mean giving you access to the site and offering suitable duties. South Australia asks hosts to collaborate in a similar way, without making them the employer.
What a missed policy costs
Schemes treat an uninsured employer harshly, because the injured worker still has to be looked after. Tasmania keeps a nominal insurer for exactly that case. Victoria can make an unregistered employer reimburse the compensation paid to its injured workers, on top of penalties. The ACT sets a civil penalty of up to double the avoided premium. The Northern Territory can order a business to stop until it is insured.
Underdeclaring is the quieter version of the same mistake. Put construction wages under an office code and the premium looks cheap right up until the first serious claim or the insurer's wage audit, and then the scheme recovers the gap. If your rate card was priced on the cheap code, every hour you billed was underpriced. The cash flow gap in labour hire shows how quickly a cost like that eats the float.
What we see when a temp desk asks about WorkCover
In our experience, when WorkCover comes up in the working session, the question is rarely about the policy itself. It is about the rate. A recruiter with 40 workers spread across a warehouse, a factory and a civil crew has never had to know that each of those clients carries its own classification. He knows his longest standing client by name and margin, rarely by classification code. We ask for the client list early for that reason, because the industry of each site decides the cost of every worker you put there.
Charlene handles WorkCover claims for our partners, so when a worker is hurt on a client site the claim has a named person behind it from the first phone call. Licensing, payroll, funding, insurances, WorkCover and collections are handled inside the partnership, one point of contact instead of twenty suppliers. You keep recruiting while the claim runs.
Frequently asked questions
Does the host pay WorkCover for labour hire workers?
No. Your labour hire business employs and pays the worker, so it holds the workers compensation policy and pays the premium in every state and territory. The host still has safety duties to the worker on its site. In Victoria and South Australia it must also cooperate with the labour hire business on a return to work.
How is a labour hire WorkCover premium calculated?
In four of the schemes, wages for on hired workers are declared against the industry classification of each host's workplace. Victoria, Queensland, South Australia and Western Australia all publish that approach. Your own office staff sit in a separate labour supply class. New South Wales has its own rule for workers hired out, so confirm it with icare.
When does a new labour hire business need a policy?
Before the first worker starts in most states. Queensland, Western Australia, Tasmania, the ACT and the Northern Territory require cover for any employer of workers. Victoria and New South Wales start at more than $7,500 of yearly wages, or with the first apprentice. South Australia gives you 14 days from employing your first worker to register.
Do I need a separate policy in each state?
Usually, yes. Each state runs a separate scheme, and a desk paying wages for work in two states should expect to hold a policy in each and check both thresholds. The Northern Territory says it directly: a policy from another state does not cover workers employed to work in the Territory.
What happens if I declare wages under the wrong classification?
Expect the scheme to recover the premium you should have paid. Western Australia treats a false remuneration declaration as an offence. Victoria and Queensland both set the class from the host's workplace or business activity, not from the worker's job title. Check each client's code at the start and update it when a worker moves sites.
The next step isn't a sales call
This page gets two kinds of readers. One already runs a desk and is checking a WorkCover declaration. The other runs a temp desk inside someone else's agency, with 30 or 50 workers out, and has just counted how many different client industries those workers sit in. WorkCover was never the wall on its own. The payroll float, the insurance stack, the licence and collections stand together. Staying behind them was smart. It isn't anymore.
That is what the working session is for. Bring your real numbers: workers out, weekly margin, the client list and the float you think you would need. Meet Cathy, who runs payroll, and Charlene, who handles WorkCover claims, and stress test us. Half the people who sit the session sign. The other half leave knowing exactly what their desk is worth under their own name. 100% your brand, yours to keep. We start four agencies a month. Nothing is public, ever.
