Business
Labour Hire Licence ACT: Fee, How to Apply and Penalties
Anyone supplying workers in the ACT needs a WorkSafe ACT licence first. The $3,461 fee, the forms, three week processing, 7 day notices and the penalties.
Any business that supplies workers to a hirer in the ACT needs a labour hire licence from WorkSafe ACT before the first worker starts. The application fee is $3,461, with no GST, paid when you submit. You apply online with your forms ready, processing takes up to three weeks, the licence lasts 12 months, and changes must be reported within 7 days. Supplying workers unlicensed carries up to 3,000 penalty units for a corporation and 800 for an individual.
WorkSafe ACT is the territory regulator that runs the scheme, and the Labour Hire Licensing Act 2020 is the law it administers. Unlike Queensland or Victoria, the ACT charges one flat fee whatever your size. A two worker desk pays the same as a 400 worker provider. The territory is one of four places in Australia with a scheme, and a licence from any of them does not let you supply workers in another. Our guide to the labour hire licence in every state sets the four schemes side by side, with the fee, the portal and the renewal clock for each one. In brief, one regulator, one flat fee and one 12 month licence cover the whole territory.
Who needs a labour hire licence in the ACT
Section 7 of the Act holds the test. You provide labour hire services if, while carrying on a business, you supply a worker to another person, whom the Act calls the hirer, to do work. Supply happens on the day the worker starts.
The definition is deliberately wide. It applies whether or not the worker is your employee, whether or not there is a written contract, and whether you supply directly or through someone else in the chain. It also applies whoever controls the work on site. A temp desk sending a forklift driver to a Fyshwick warehouse is caught. So is a contractor placing a team of cleaners in a Barton office block.
Where you are based does not change the answer. WorkSafe ACT's FAQ says the scheme covers providers based in the territory, including when they hire out labour elsewhere, and providers based in New South Wales or anywhere else who supply workers inside the ACT. A Queanbeyan agency with a Canberra client needs the licence.
The exempt workers declaration is the ministerial instrument that takes some people outside the definition of a worker. Under the exempt workers declaration, you do not need a licence to supply:
- High income earners above the Fair Work high income threshold who are not covered by an award or agreement.
- Genuine secondees and in house staff who are not engaged on a supply basis.
- Public servants.
- One director of a small company with no more than two directors.
- Workers moved within a single recognisable business.
Permanent placement also sits outside the scheme. If the candidate joins the client's payroll, you have not supplied a worker at all, because that person never does work for a hirer while being paid through your business. Your licence attaches to the business that supplies and pays temps, and the test is applied worker by worker. One exempt contractor on the books does not excuse the forklift driver.
What an ACT labour hire licence costs
WorkSafe charges $3,461 under the current fee determination, the instrument the territory remakes each year, and GST does not apply. You pay at the moment you submit the online form, and WorkSafe can reject an application that arrives unpaid.
There are no tiers. Queensland prices its licence by wages and Victoria by turnover, so a small new desk pays less there at the first tier. In the ACT a solo recruiter with three temps out pays the full amount on day one, exactly what a provider with several hundred workers on site pays. Last year's determination set the fee at $3,341, and the explanatory statement indexes it to a wage price forecast, so expect it to rise again each 1 July.
That fee is the visible cost. Underneath it sit the obligations a suitable person is expected to meet from the first shift:
- Workers compensation cover for every worker you employ.
- Payroll that pays the award or agreement rate, with super and tax right first time.
- A record of who works where, in which industry, and under which visa.
- Enough cash to meet wages before the hirer pays the invoice.
That last line is the one a temp desk recruiter feels. Twenty workers on $1,200 a week each is $24,000 in wages every Wednesday. Carry that weekly payroll float for a month before the first invoice is paid, and the $3,461 licence fee starts to look like a rounding error beside it.
How to apply for a labour hire licence in the ACT
ACT applications are short, and the form is unforgiving. It has no save function, so WorkSafe asks you to set aside 20 to 30 minutes and have every document ready before you open it.
- Run the eligibility questionnaire on the WorkSafe ACT licensing page. If every worker you supply falls inside the exempt classes, you stop here.
- Settle who the applicant is and who its influential persons are. The suitable person test is the character and compliance assessment in the Act that every applicant must pass. For a company, WorkSafe looks at each influential person, meaning anyone who can direct or substantially influence how the business runs. The suitable person test weighs honesty, integrity and professionalism, past compliance with workplace laws, and any previous licence cancellation or suspension.
- Download the forms from the WorkSafe resources page. Expect SP1, the suitable person form, and ROIC, the release of information consent. Add AA1 if an adviser lodges for you and PC1 to list any payroll companies you use. Individuals and partnerships also complete PI1, proof of identity. If you house workers, fill in the accommodation register.
- Gather evidence of financial capacity. WorkSafe's compliance and enforcement policy says an application must show that the business can meet its obligations under workplace laws and standards. A bank statement, a cash flow forecast and your workers compensation policy carry most of that weight.
- Submit the online form and pay the fee in the same sitting. Incomplete or unpaid applications are not processed.
- Wait for the decision, which WorkSafe says takes up to three weeks from submission. Questions from the licensing officer stop the clock until you answer.
- Supply nobody until the licence is granted. An application under assessment is not a licence, and WorkSafe states that you cannot provide workers in that window.
An interstate licence helps here without replacing this one. Under the Act, WorkSafe can count a licence held under another labour hire law towards suitability, provided no regulator has taken action against it. You still apply, pay and wait. If you supply workers across a border as well, our Queensland licence page and our Victorian licence page cover those applications, their fees and their reporting clocks.
Renewal every 12 months
Because the Act caps a licence at 12 months, renewal is an annual job, and it is the one deadline in the scheme that arrives whether or not anything in the business has changed. WorkSafe ACT sends a renewal notice four weeks before expiry and asks for at least two weeks to assess what you lodge. Renewals now go through the WorkSafe business portal, and the portal account has to be approved first. That approval alone can take one to two business days. Set a calendar reminder six weeks out and lodge the day the notice arrives.
A licence that expires is gone. There is no grace window in the ACT scheme, and a worker supplied the next morning is supplied without a licence.
What you report while you hold the licence
Unlike Queensland, with its six month report, the territory has no fixed reporting calendar. Instead, every licensee reports a change in circumstance within 7 days of it happening. That covers:
- Any change to the answers you gave on the suitable person test.
- A change of name, business name or contact details.
- Starting to provide accommodation to workers.
- Starting to supply workers who hold visas.
Seven days is tight. A new director, a fresh conviction or a new visa worker on Monday means a notice by the following Monday. Build it into the onboarding checklist for every worker and every board change.
Every licence also carries standing conditions under the Act. You comply with the Act itself, you do not breach workplace laws and standards, and you tell WorkSafe about any regulatory action taken against you under a labour hire law in another state. Grounds for action, including ceasing to be a suitable person, are listed in the compliance and enforcement policy. An unpaid award entitlement can come back as a licence problem.
Other territory obligations sit beside the licence rather than under it. ABLIS, the government's business licence finder, lists insurance and portable long service leave registration among the obligations a provider may carry as well.
Penalties for unlicensed labour hire in the ACT
Maximums are expressed in penalty units, and the Act sets them as follows:
- Providing labour hire services without a licence: 3,000 penalty units for a corporation, 800 for an individual.
- Falsely representing that you hold a licence: 200 penalty units. A website offering temps in Canberra before the licence is granted can fall here.
- A hirer engaging an unlicensed provider: a civil penalty on the same scale, 3,000 units for a corporation and 800 for an individual.
Hirer exposure is why your clients check. A hirer has a defence if the provider was on the public register when the arrangement was made. The public register is WorkSafe's searchable list of licensed providers, and a careful procurement officer looks you up before the purchase order goes out.
WorkSafe has had a full register for years. During the 2021 transition period alone it issued more than 500 licences, and enforcement began the day after that period closed. In a territory this size, an unlisted name on a site tends to get noticed.
What we see when a Canberra desk weighs the licence
Canberra changes the shape of a temp desk. In our experience the first serious client is often a government buyer, and a government buyer reaches you through a panel rather than a phone call. We sit on government panels carrying $400m+ a year of recruitment spend. That access is real, but a panel buyer checks the register before anything else, so the licence comes first and the panel second. Recruiters we talk to in the ACT rarely flinch at the flat fee. What stops them is the stack that sits behind it: workers compensation, payroll, the funding gap and the collections chase. For our partners, licensing, payroll, funding, insurances, WorkCover and collections are handled inside the partnership, with one point of contact. Across our own partner agencies we have seen the same pattern in every territory and state. Most recruiters who go solo stall inside six months.
Government buyers pay on their own terms, which makes collections the line that decides whether a Canberra desk breathes. Phil runs credit and collections for our partners. We measured collections the way the industry does, by days sales outstanding: DSO 22 vs 45 days. For a desk with a department as its main client, that gap is the difference between funding three weeks of wages and funding six.
Frequently asked questions
How much is a labour hire licence in the ACT?
It costs $3,461 to apply, with no GST, under the territory's fee determination for the current financial year. There are no size tiers, so a solo operator pays the same as a large provider. You pay when you submit the form. Fees are indexed each 1 July, so check WorkSafe ACT before you lodge.
How long does an ACT labour hire licence take?
WorkSafe ACT says processing takes up to three weeks from the date you submit. Requests for more information pause the clock, so a complete file saves you weeks of back and forth. You cannot supply any worker while the application is being assessed. Renewals need at least two weeks, and WorkSafe sends the renewal notice four weeks before expiry.
Does a recruitment agency need a labour hire licence in the ACT?
Only for the workers it supplies to a hirer. A permanent placement, where the candidate becomes the client's employee, is recruitment and needs no licence. A temp or contract desk that sends workers to a client is providing labour hire services under section 7, whatever it calls itself. Exempt classes such as public servants are listed in the declaration.
Does my NSW business need an ACT licence?
Yes, if it supplies workers inside the ACT. WorkSafe ACT's scheme covers providers based outside the territory who place workers in it, wherever their head office sits. A Queanbeyan or Sydney agency with a Canberra client applies, pays and waits like anyone else. Your New South Wales obligations, such as payroll tax and workers compensation, continue alongside.
What must I tell WorkSafe ACT after I am licensed?
You report a change in circumstance within 7 days. That covers changed answers on the suitable person test, a new name or contact details, starting to provide accommodation, and starting to supply visa holders. You also tell WorkSafe about regulatory action taken against you under another state's labour hire law. Late notices put the licence at risk.
The next step isn't a sales call
Two kinds of people read this page. One is a business owner who needs the form done this week. The other runs a temp desk inside someone else's agency, with 20 or 40 workers out across Canberra sites. He has read the fee and thought: that is the easy part. It is. This licence was never the wall. What stands in the way is the payroll float, the insurance stack, WorkCover and collections. Staying behind it was smart. It isn't anymore.
That is what the working session is for. Bring your real numbers: workers out, weekly margin, the float you think you would need. Meet Cathy, who runs payroll, and Charlene, who handles WorkCover claims, and stress test us. Half the people who sit the session sign. The other half leave knowing exactly what their desk is worth under their own name. 100% your brand, yours to keep. We start four agencies a month. Nothing is public, ever.
